Home » Products » Handi-Spray

For the application of CorrosionX Aviation, CorrosionX, CorrosionX Heavy Duty and other liquids

The Handi-Spray application systems were designed to atomize CorrosionX and CorrosionX Aviation into an incredibly fine, smoke-like fog. This fine atomization converts low and medium viscosity liquid products into micro-droplets, which stay suspended in the air for an extended period of time. This degree of atomization is key for achieving the most cost-effective and thorough application corrosion preventative compounds and other liquid products into airframes and other irregularly shaped enclosures where direct application is not practical (e.g. around blind corners, unreachable areas, etc.).

 

For example: When properly fogged into an enclosed area like an airplane wing, the suspended CorrosionX Aviation vapor will entirely fill the void of an enclosed area and deposit a light coating of the product on every surface. This allows CorrosionX Aviation to go around blind corners, to treat the back sides of spars and to penetrate into lap seams and other areas that cannot be sprayed directly.


In contrast, although overspraying and saturating an airframe using a common pump-up will usually not cause any damage, it will cause CorrosionX to drip and weep for longer than it needs to (not to mention wasting money by using excess product). The Handi-Spray systems will spray CorrosionX Heavy Duty nicely, but they are not able to atomize Heavy Duty as it is too thick to “fog”.

 

Used extensively by the U.S. military as well as NATO forces, all CorrosionX products and Handi-Spray application equipment have been assigned National Stock Numbers (NSN) by the General Services Agency (GSA) and are available for procurement through the Defense Logistics Agency (DLA).

Handi-Spray™ Application Systems is available in three sizes:
5 gallon Handi-Spray™ system
Required Air Pressure: 80 PSI @ 5 – 6 CFM
Capacity: 5 gallons
Weight: 28 lbs
Hose: 25′
Color: Blue

Part Number: 10105 includes basic unit and 3 wands

Basic unit comprises:

  • 1″ cricket
  • 3′ x 1/4″ 360° wand
  • 3′ Superflex

Part Number: 10105A includes basic unit with 6 wands

2.5 gallon Handi-Spray™ system
Required Air Pressure: 80 PSI @ 5 – 6 CFM
Capacity: 2.5 gallons
Weight: 22 lbs
Hose: 10′
Color: Blue

Part Number: 10106 includes basic unit and 3 wands

Basic unit comprises:

  • 1″ cricket
  • 3′ x 1/4″ 360° wand
  • 3′ Superflex

Part Number: 10106A includes basic unit and 6 wands

Handi-Spray™ Belt Pak system
Includes sprayer, web belt and holster
Required Air Pressure: 80 PSI @ 5 – 6 CFM Capacity: 1 quart
Weight: 7 lbs
Hose: 3′

Part Number: 10108 includes basic unit and 3 wands

Basic unit comprises:

  • 1″ cricket
  • 5″ x 1/8″ hook wand
  • 3′ Superflex

Part Number: 10108A includes basic unit and 6 wands