Home » Products » RejeX
SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, AIRPLANE & MOTORCYCLE

RejeX is a thin-film polymer coating designed to provide a high-release protective finish for all kinds of vehicles. This very thin, non-porous film – less than a micron thick – prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, acid rain, hard water stains, road grime, brake dust, etc. It also makes graffiti easy to remove.

RejeX was originally developed to meet the requirements of the U.S. military corrosion prevention and control programs to prevent jet turbine exhaust from damaging paint and causing corrosion on the aluminum skins on military aircraft. Today, RejeX is used on vehicles ranging from the US Navy’s largest and most sophisticated surface ships, to corporate jets and Piper Cubs and from elite race cars, to boats, yachts, motorcycles, buses, trucks, tractors, industrial vehicles and minivans.

RejeX is also very popular for use on furniture and as a protective sealant for stone counters, shower stalls and glass windows and doors.

wpdance


NOTHING STICKS BUT THE SHINE!®

RejeX is easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months.

The non-abrasive RejeX is gentle on fiberglass, glossy plastics, glass windows and acryclic windshields. With the high release protective finish, most stains and grime won’t stick and usually come off with just a stream of water or a wet cloth.

When used on tyre rims, it makes cleaning of break dust easy and leaves a shine on the metal. It can also be applied to windshields to repel rain.


RejeX is also unmatched in its ability to reject damage and oxidation caused by UV exposure.

RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.

Named one of the “Top 10 Boat Care Products – Ever”, RejeX should be used instead of wax to protect boats from exposure to the elements. RejeX provides the best protection available to gel coat and marine paint surfaces all while providing an incomparable, brilliant, long-lasting, deep shine. Read more here.

To get a lasting mirror-like finish, just apply a thin film of RejeX with a soft, clean cloth on the surface, let it dry to a haze in about 20 minutes, and wipe it off effortlessly with another soft cloth. No extensive rubbing or buffing is required. Protecting your vehicle with RejeX will save countless hours of cleaning and scrubbing.

 

RejeX should be applied to a cool (less than 29° C) dry clean surface, out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won’t perform up to its potential.

For best results, allow it to cure for 8-12 hours after the haze has been wiped off. (depending on the humidity; the higher the humidity, the faster the cure).Curing is required to allow the ‘monomers’ (polymer building blocks) that make RejeX to attach themselves to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners etc. before it is cured, the contaminants will interfere with or imbed in the protective film, preventing the RejeX film from achieving maximum performance.

RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and gloss. RejeX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish.

RejeX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. As RejeX leaves a shinier, longer-lasting finish than wax, there is no reason to wax over RejeX. And it will be difficult for waxes to adhere to RejeX!

If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. Abrasive cleaners, polishes, rubbing compounds and some chemical paint strippers can remove RejeX.

  1. Shake well and apply to a clean, dry surface that is cool to the touch. Do not apply in direct sunlight or in temperatures greater than 29° C.
  2. After RejeX dries to a haze in about 20 minutes, simply wipe it off with a piece of cloth. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX wipes on and off easily.
  3. Allow RejeX to cure for 8 -12 hours where it won’t be exposed to the inclement weather or contaminants.
  4. RejeX can last for well over a year,  but for optimum protection, reapply every 4-6 months as needed.

FREQUENTLY ASKED QUESTIONS (click here)